Industrial Filters Bag

The main purpose of Industrial Filters Bag is to carryover out filtrage. Bags filters are made from  carefully selected media Satisfying professional standards & parameters. There are different kinds of media offered which are implemented to manufacture these bags. some of these are needle felt, mono filament & multi filament . These medias are efficient in eliminating solid crystals from liquid where giant volume of contaminants are present. These Bags are an effective alternative to many filtration issues.

Bag filters are equipment of high performance & its purification status initiates from 1 & exceeds till 200 microns. they have glutinous liquid capability. they offer high flow rate. These Bags provide low pressure drop. Industrial Filters offer broad chemical compatibility. they present positive sealing arrangement with choice of materials.

It has high dirt holding capability. it's less servicing labor. it is FDA & NSF compliance .

Polypropylene Non-Woven Felt Standard Class- it is made out of non-woven micron felt bag filters. it is single side singed/glazed to eliminate loose fiber migration.

Polypropylene Non-Woven Felt Extended Class- it is the primary filter layer made from non single media. keeping all pore openings on the felt unblocked, it is useful in slowing down the premature production of dust cakes. Therefore it extends filters service life.

Housings are designed as per ASME Sec VIII Div.I, IBR, and other national & international codes on request. Visual or Audible warning technique is provided to get alert for clogging of filter element on request.

Industrial Filters Design

In this paper, the filter design process involved in a few of the key issues, such as the main parameters determined by the structure, & the filter design ought to pay attention to a few of the difficulties.

the design of a Industrial Filters core, which chiefly describes the design method involved a lot of key issues. Filter media for the heavy hydrocarbon condensate & natural gas, the working pressure of 4.4MPa, working temperature is 40 , refer to the user's needs, ultimately decide the design pressure of 6.4MPa, corrosion allowance of 3mm. Working principle is as when the medium from the way in, after a sure buffer, massive particles & liquid free of impurities sinking, rising air purified through the Cartridge Filters discharged from the exit. Encountered in the design method, several issues, the following discussion of the main solution to the problem.

Check opening reinforcement issue Over the import  and export by five huge pass when checking reinforcement pad, and over reinforcement, whether in small multi-thick reinforcement pad can not be adopted. According to JB/T4736- 2002 "Reinforcement" in desk 1, "Reinforcement size series", the reinforcement ring and the minimum thickness of 30mm and GB150 in shell thickness of reinforcement pad on the restrictive requirements are: " reinforcement pad thickness less than or equal to the name of the thickness of the shell 1.5 38mm ". Reinforcement ought to not be used otherwise, but ought to be used; overall reinforcement or reinforcing the general forging. According to the requirements of over these openings are reinforced with thick wall, and to make definite that thinning thick over the length L 3 part of the thickness difference, to take over and the shell with full penetration, took over the outside wall of the shell connected with r rounding, to keep away from sharp corners.

So that they can successfully calculated by reinforcement.

The top of the Industrial Filters settings tool flange, to meet the requirements of filter often replace them because of cylinder diameter 800mm, according to JB/T4700-2000 "pressure vessel flanges" requirements designed for the actual computing devices flange, & in the light HG20592-1997 "steel pipe flanges, gaskets, fasteners" design equipment & flange covers, flange covers the weight of 887Kg, by the usual manual rotation is difficult, after several studies, in reference Manhole transfer arm based on the realities, the transfer arm with bearings, simple to turn, the result was satisfactory.

Internal fastening the filter on the tank bolts, due to internal corrosion allowance 3mm, if the use of carbon steel, corrosion allowance is difficult to think about the choice, so pick the stainless steel. With the walkway support brackets, loose screws type, simple dis assembly, which will help ship.

Flammable substances as natural gas medium, does not allow micro-leakage, air tightness testing of their conduct, inspection of tiny penetrating vessel defects, to jointly guarantee the safety of equipment.